The basic element of all thermostat controls .all the desirable features of the ideal thermostat –high sensitivity , wide adjustment range ,small sized, rugged construction, vibration resistant, and low cost are included in this thermostat control.

This unit may be inserted in a15.875mm (5/8”) reamed hole. If reamed hole is used, a short spline should be added this prevents thermostat from turning when the temperature adjusting sleeve is turned. (See modifications.)

For limited space applications, a shorter (80mm) cartridge unit is available.

Temperature Range

:

-70 degree   to   + 300 Degree Celsius

Hex Head Thermostat


Has all the internal features of the cartridge type above with the addition of a standard pipe thread for mounting purpose, a dial and knob can be supplied with this model. (See modifications.)

Temperature Range

:

-70 degree   to   + 300 Degree Celsius

Block Head Thermostat



This unit may be inserted in a 15.875 mm (5/8”) reamed hole of the medium to be controlled. it has the same mounting characteristics as the cartridge type unit but is designed so additional component such as a dial and knob may be included. (See modifications.)

Temperature Range

:

-70 degree   to   + 300 Degree Celsius

Flange Head Thermostat



Has all the features of the block head type except a mounting flange has been provided for easy mounting.

Temperature Range

:

-70 degree   to   + 300 Degree Celsius

Coupling Head Thermostat



The coupling head unit has a hexagonal mounting section with standard male pipe threads at each end, either of which may be used for mounting. This unit may be directly attached to electrical conduits

Temperature Range

:

-70 degree   to   + 300 Degree Celsius